It is a 100% pure acrylic emulsion based, semi-matt elastomeric insulation exterior paint that cures with UV rays, hardens thanks to cross-links, has crack bridging properties. With its special pure acrylic binder, it has a low tendency to fouling, excellent resistance to color fading and high water vapor permeability. It is resistant to harsh climatic conditions, has high coverage, alkali and chemical resistance. With its elastic binder structure, it forms a film layer on the surface, stretches perfectly. It bridges the cracks that may occur later and prevents the formation of capillary cracks that cause big problems.
It is use on all kinds of concrete, gas concrete, briquette, brick, Joint Profile , cement board , plaster and similar mineral surfaces.
METHOD OF APPLICATION:
The surfaces to be applied are cleaned of all kinds of dirt, oil, loose and swollen layers and the dusts that prevent the last coat paint and primer paint from adhering to the surface, then saturated with ACRYMAXX PRIMER
After the primer has dried, ACRYMAXX is applied to the surfaces in two layers. It should be waited at least for 6 hours between layers. It is thinned with 10% -15% volume of water and apply with brush or roller.
Depending on the type and absorbency and structure of the application surface, ~ 14-16m2 (*) area can be painted with 1Lt ACRYMAXX .
(*) Since the amount of consumption may vary depending on the surface, air temperature and application conditions, the stated consumption rates are for suggestion purposes. A controlled sample study should be carried out for precise consumption.
It should be stored for 24 months in a closed place and in its original sealed packaging at + 5 ° C to + 50 ° C.
Packing: 2.5-15 Lt
Drying Time: Touch Dry 2-3 Hours, Full Dry 24 Hours
Safety: – MSDS –
DANGER & SAFETY WARNINGS:
R22 – Harmful if swallowed.
S-2 Keep out of the reach of children.
S-24 / S-25 Avoid contact with eyes and skin.
S-46 If swallowed, seek medical advice immediately; show the container or label.