It is a water-based, 100% pure acrylic copolymer binder-based, silicone-added, white, filled, elastic exterior primer.
It shows very good adhesion to all kinds of surfaces. Since it creates a solid surface, it binds the paint to be applied to the subfloor. It reduces the last coat paint consumption. It is alkali resistant, odorless, friendly to human health and the environment.
It is applied as a primer on all kinds of thin plastered concrete, gas concrete, briquette, brick and similar surfaces in order to increase surface adherence and reduce paint consumption
METHOD OF APPLICATION
After the application surfaces are cleaned of all kinds of dirt, oil, loose and swollen layers, ACRYMAXX PRIMER is mixed with 10-15% water by volume and applied to the surface as a single layer with a roller or brush.
Depending on the type, absorbency and structure of the surface to be applied, ~ 10 -14 m2 (*) area can be primed in one coat with 1 lt ACRYMAXX PRIMER.
(*) The amount of consumption may vary depending on the surface, air temperature, application conditions, thinning rate and application thickness. For precise consumption, sample work should be done on the surface to be applied in a controlled manner.
PACKAGING: 15 lt
It can be stored for 24 months at +5° C to +50° C indoors and in its original sealed packaging.
DANGER & SECURITY INSTRUCTIONS
R 22- Harmfull when swalloved
S 2-Keep out of reach of children
S 24/25- Harm full in touch with eyes and skin
S 46- Contact your doctor if swallowing.