It is a water-based, solvent-free, polymer dispersion-based, filled lining material formulated for ceramic-on-ceramic applications.
It increases the adhesion strength by creating a rough surface for sticking ceramics on smooth and shiny floors. It enables the tile adhesive to adhere to the surface better by ensuring that the dusty parts of the surfaces adhere to the surface. The product is ready to use
Ceramic, gross concrete, marble, plywood etc. It is used as a primer on smooth and glossy surfaces and absorbent surfaces such as plaster, concrete, plaster, screed, wood. Cannot be used on surfaces that are constantly exposed to water
METHOD OF APPLICATION
After the application surfaces are cleaned of all kinds of dirt, oil, loose and swollen layers, TILE PRIMER is applied to the surface as a single layer with a roller or brush without thinning.
With 1 kg of TILE PRIMER, ~ 8 -10 m2 (*) area can be primed in one coat.
(*) The amount of consumption may vary depending on the surface, air temperature, application conditions, thinning rate and application thickness. For precise consumption, sample work should be done on the surface to be applied in a controlled manner.
THINNING: Not thinning.
PACKAGING: 5 kg
It can be stored for 24 months at +5° C to +50° C indoors and in its original sealed packaging.
DANGER & SECURITY INSTRUCTIONS
R 22- Harmfull when swalloved
S 2-Keep out of reach of children
S 24/25- Harm full in touch with eyes and skin
S 46- Contact your doctor if swallowing.