DESCRIPTION
It is a water-based, acrylic copolymer binder-based, transparent, concentrated interior and exterior primer.
PROPERTIES
It shows very good adhesion to all kinds of surfaces. Since it creates a solid surface, it binds the paint to be applied to the subfloor. It reduces the last coat paint consumption. It is odorless, friendly to human health and the environment.
USAGE AREAS
It is applied as a primer on all kinds of thin plastered concrete, gas concrete, briquette, brick and similar surfaces in order to increase surface adherence and reduce paint consumption.
METHOD OF APPLICATION
After the application surfaces are cleaned of all kinds of dirt, oil, loose and swollen layers, 6-7 liters of water is added to 1 liter of 1*7 CONCENTRATED PRIMER and mixed, and applied to the surface as a single layer with a roller or brush. The mixture should be mixed at certain time intervals.
Depending on the type, absorbency and structure of the surface to be applied, ~ 45-60 m2 (*) area can be primed in one coat with 1 lt of 1*7 CONCENTRATED PRIMER.
(*) Since the amount of consumption may vary depending on the surface, air temperature, application conditions, thinning rate and application thickness, the consumption rates stated are for suggestions. Controlled sample study should be done for definite consumption.
THINNING: It is thinned with water.
PACKAGING: 2,5 lt -7,5 lt – 15 lt
STORAGE CONDITIONS
It can be stored for 24 months at +5° C to +50° C indoors and in its original sealed packaging.
DANGER & SECURITY INSTRUCTIONS
R 22- Harmfull when swalloved
S 2-Keep out of reach of children
S 24/25- Harm full in touch with eyes and skin
S 46- Contact your doctor if swallowing.
