DEFINITION
It is a water-based, acrylic emulsion-based, fiber-added, liquid roof insulation material with high chemical and UV resistance.
PRODUCT FEATURES
It is easy to apply, developed for waterproofing and especially for roof insulation. It has high chemical and UV resistance, excellent adhesion, waterproof and decorative. Thanks to the fiber in its structure, it is more resistant to mechanical impacts. It covers surfaces easily with its semi-fluid feature. Thanks to its water vapor permeability, it allows moisture to escape. It maintains its elasticity in hot and cold differences.
USAGE AREAS
It can be used safely in buildings where water and moisture impermeability is required, concrete, plaster, brick, ytong, briquette, eternit, wood, corrugated and non-corrugated asbestos roofing sheets.
METHOD OF APPLICATION
After the application surfaces are cleaned of all kinds of dirt, oil, loose and swollen layers, STOP-SU is diluted with 40% water and applied as a primer. After the primer is applied, the ready-to-use STOP-SU is applied to the surface in 2-3 layers with a brush or roller. When applying between coats, each coat should be applied in the opposite direction to the previous coat. Min. 8 hours should be waited.
~ 0.5 – 1 m2 (*) area can be putty with 1 kg of STOP-SU.
(*) The amount of consumption may vary depending on the surface, air temperature, application conditions, thinning rate and application thickness. For precise consumption, sample work should be done on the surface to be applied in a controlled manner.
THINING : Ready to Use .
PACKAGING: 3 kg – 20 kg
STORAGE CONDITIONS
It can be stored for 24 months at +5°C to +50°C indoors and in its original sealed packaging.
DANGER AND SAFETY WARNINGS
R22: Harmful if swallowed.
S-2: Keep out of reach of children.
S-24/S-25: Avoid contact with eyes and skin.
S-46: If swallowed, seek medical advice immediately; show the container or label.
